Don’t mess with me

The other day I had a difference of opinion with a fondue pot. Actually its a Hersey’s S’Mores maker, but it’s just a tarted up sterno powered fondue tray. Instead of heating things like chocolate with the flame, you roast marshmallows. Otherwise its the same principle.

The tray is large and ceramic, with four little rubber feet stuck onto the bottom. Only one of those feet had decided he had stuck on long enough, and it was time to see the world without the burden of the rest of the tray. We had a few words about this, but the rubber foot was adament. So was I. Guess who won?

Its not smart to mess around with a man who has something like 20 different kinds of glue, and knows how to use them. No I didn’t go all thermo-nuclear on the rubber foot; I kept the epoxy back on the shelf. Instead I pulled out the foam safe CA glue I keep in the freezer, the thin kind. Most people do not know that CA glue (CA is short for Cyanoacrylate glue, commonly called super glue) comes in thick, medium, and thin. Thin CA is wonderful, but wickedly non viscous. Slippery as the devil, and twice as lively. It took me years of playing with the stuff to keep it off of my finger tips. I’ve learned to dab just a tiny bit, and then smear it around with a toothpick. If you do get it on your fingers (and it dries before you glue them together!) you can remove the glue with a bit of sandpaper, or an emery board, a trick I learned from my father-in-law.

Anyway, this darn foot was giving me troubles, and now it is not. Case closed.  S’Mores anyone?

Discussion Area - Leave a Comment

You must be logged in to post a comment.